Note: Search is limited to the most recent 250 articles. To access earlier articles, click Advanced Search and set an earlier date range. To search for a term containing the '&' symbol, click Advanced Search and use the 'search headings' and/or 'in first paragraph' options.

Please enter the email address that you used to subscribe on Engineering News. Your password will be sent to this address.

separate emails by commas, maximum limit of 4 addresses

Rolls-Royce takes step towards net zero ambition with mtu gensets approved for sustainable fuels

ARTICLE ENQUIRY      SAVE THIS ARTICLE      EMAIL THIS ARTICLE

/ MEDIA STATEMENT / This content is not written by Creamer Media, but is a supplied media statement.

Following successful trials on the test bench and in the field, Rolls-Royce business unit Power Systems has approved its Series 1600 and Series 4000 generator sets for use with sustainable fuels.

Rolls-Royce has taken a significant step towards meeting its net zero goals, set out last year, with the approval by Power Systems of its Series 4000 and Series 1600 diesel engines for use with a range of EN15940-certified synthetic diesel fuels in power generation applications. Following successful testing, including in the field, both types of engines can use a range of sustainable fuels including Biomass to Liquid (BtL), Hydrotreated Vegetable Oil (HVO) and Power to Liquid (PtL) fuels such as e-diesel. They can all be used to replace conventional diesel fuel.

“There is already a lot of interest in HVO in particular from many customers in the energy industry and data centre business, who want to improve their carbon footprint,” explained Tobias Ostermaier, president of the Stationary Power Solutions business unit at Rolls-Royce Power Systems. “The results from pilot customers show a significant reduction in greenhouse gases, nitrogen oxide and particulate emissions by using HVO instead of fossil diesel in their gensets.”

Last year Rolls-Royce pledged to prove its most popular in-production engines, including the Series 4000, can be used with sustainable fuels by 2023. 

The advantages of HVO are clean combustion with a reduction in particulate emissions of up to 80 percent, nitrogen oxide emissions by an average of eight percent and CO2 emissions by up to 90 percent compared to fossil diesel. Because HVO is produced from renewable raw materials, its production, transport, and combustion generate only about as many greenhouse gases as were absorbed by the plants during the growth of the biomass.

HVO use significantly reduces CO2, nitrogen oxide and particulate emissions

Waste vegetable and animal fats, and used cooking oils, can be used as base materials for HVO. They are converted into hydrocarbons by means of a catalytic reaction with the addition of hydrogen. Through this process, the fats and vegetable oils can supplement diesel as an admixture or replace it completely. The advantages of HVO are cleaner combustion with a reduction in particulate emissions of up to 80%, nitrogen oxide emissions by an average of 8% and – provided the manufacturing process and logistics make use of renewable energy – CO2 emissions by up to 90% compared to traditional diesel. Because HVO fuel is produced from renewable raw materials, its production, transport, and combustion generate only about as many greenhouse gases as were absorbed by the plants during the growth of the biomass.

Convincing performance without engine and system modifications

The tests confirmed that mtu engines using HVO perform equally as well as engines using diesel in terms of maximum power, load acceptance and fuel consumption. HVO is a drop-in fuel, which means that there are no adaptions needed to the diesel plant infrastructure, hardware or software in order for it to be used. In addition, the storage stability of this synthetic fuel is significantly better than that of biodiesel, making it even more attractive to operators of emergency power systems.

Target: 35% greenhouse gas savings by 2030 with new fuels and mtu technologies

As part of its sustainability program, Rolls-Royce announced last year that it would realign the Power Systems product portfolio so that by 2030, new fuels and mtu technologies can save 35% greenhouse gas emissions, compared to 2019 levels. The company is already successfully operating a mtu fuel cell system has established a clear roadmap for the introduction of hydrogen engines and is now progressively releasing further engines that can run on sustainable fuels in more applications.

Edited by: Creamer Media Reporter EMAIL THIS ARTICLE      SAVE THIS ARTICLE ARTICLE ENQUIRY

To subscribe email subscriptions@creamermedia.co.za or click here To advertise email advertising@creamermedia.co.za or click here

Engineering News is a product of Creamer Media. www.creamermedia.co.za

Other Creamer Media Products include: Mining Weekly
Research Channel Africa Polity

Sign up for our FREE daily email newsletter Receive daily sector news alerts

We offer a variety of subscriptions to our Magazine, Website, PDF Reports and our photo library.

Subscriptions are available via the Creamer Media Store.

Advertising on Engineering News is an effective way to build and consolidate a company's profile among clients and prospective clients. Email advertising@creamermedia.co.za