Gear-obsessed editors choose every product we review. We may earn commission if you buy from a link. How we test gear.

There are several compelling reasons to use pure nitrogen in tires, but it’s not a must-have.

Is there really an advantage to using nitrogen in tires rather than air, such as better fuel economy, a smoother ride, or longer tire life? Well, sort of.

Traditionally, car tires have been filled with compressed air. Air is 78 percent nitrogen and just under 21 percent oxygen, and the rest is water vapor, CO2, and small concentrations of noble gases such as neon and argon.

Now some people prefer filling their car’s tires with pure nitrogen, and there are several compelling reasons to do so.

Improperly inflated tires can wear unevenly, wear out faster, and ruin your fuel economy. Simply put, pure nitrogen does a better job of maintaining the right tire pressure, thus enabling your car and its tires to work as efficiently as possible. For most cars, this pressure is measured in pounds per square inch (or psi for short) and your car’s recommended pressures should be printed on a door sill or in the owner’s manual.

All tires lose some pressure over time from the gasses within them permeating through the tire rubber. Nitrogen does this about 40 percent slower than regular air, according to Chemical & Engineering News, and this results in more stable tire pressures over a longer period of time. Oxygen also reacts with the tire rubber as it permeates through it, which leads to a thermo-oxidative process that degrades rubber over time.

Racers also figured out that tires filled with nitrogen rather than air react less to temperature swings. Gases expand with heat and contract with cold, which is why your road car’s tire pressure warning light usually comes on when colder fall temperatures hit. For racing teams, using nitrogen means their tires will have more consistent inflation pressures during a race as the tires heat up with use. When you’re tweaking a race car’s handling with half-psi changes, that’s important.

Water (which typically enters in the form of humidity) is a very bad thing to have inside a tire. Whether it’s present as a vapor or even as a liquid in a tire, water causes larger changes in pressure with varying temperatures than dry air does. Worse yet, water also helps corrode the steel or aluminum rim over time.

Water is less of a concern with nitrogen-filled tires. Any system that delivers pure nitrogen is also going to deliver dry nitrogen. Filling tires with nitrogen involves filling and purging several times in succession to get as much oxygen, water, and other gases out of the tire as possible.

So, there are the benefits. With nitrogen in tires, your tire pressures will remain more constant, saving you a small amount in fuel and tire-maintenance costs. There will be less moisture inside your tires, which means less corrosion on your wheels. However, if your tires were filled with nitrogen (usually denoted by green valve-stem caps) and you’re low on pressure, don’t be afraid to bring up your psi with regular old air.

You also shouldn’t let your nitrogen-filled tires lull you into complacency when it comes to checking air pressures. Keith Willcome, who works in consumer tire engineering for Bridgestone Americas Tire Operations explains:

That’s a good reminder to check those tire pressures at least once a month regardless of what’s inside.

Like Joes, Longacre sells to racers, and some of its most precise digital pro gauges cost hundreds of dollars. This lower-cost digital gauge has some advantages over analog units. For two, it’s easier to read and displays pressure in 0.2-psi increments. Plus, Longacre claims it’s accurate to 0.8 percent.

This is the gauge that we deem good enough to use in the test garage. We set all of our vehicles’ tire pressures precisely to ensure that they perform their best in our comprehensive testing program. This one reads in half-pound increments, so you can set your tires’ pressures as accurately as we do.

While this analog gauge is a bit of a dinosaur, it’s still far better than nothing and will help keep your tires in the correct inflation range—and do it for a rock-bottom price.

While the ARB601 is an exceptionally precise pressure gauge, it doubles as a deflator and inflator. We found that its digital display is easy to read at any time of day, in various levels of light. And when a product is easy to operate, you’re more likely to use it.